Computer engraving signs and plate making

Signage Common Sense
2020-04-29

Computer engraving signs and plate making

Computer engraved signs can also be regarded as a new process, it has a strong three-dimensional sense, especially the three-dimensional engraved signs are more beautiful. Computer engraving signs usually use two-color plate engraving signs and panels and three-dimensional engraving cards of plexiglass. There are also laser engraving marking and cutting plastic plate, metal plate text graphics graphics signs, the effect is also very good.

There are two common plate-making methods for screen-printed signage panels: one is the indirect method, the plate-making with photosensitive film, especially the plate-making with capillary photosensitive film, the quality is very good; the second is the direct method, plate-making with diazo photosensitive adhesive. Photosensitive plate making is not as easy to learn and has higher printing durability than diazo photoresist making, but it requires a lot of skill and skill.

When making small-line thin-line signage panels, be sure to use film negatives, because the black areas of the film are very dark, and the transparent areas are very transparent, which can minimize the printing time and facilitate plate making. For example, if you use sulfuric acid paper or paper coated with oil film to make a plate, the film will be firm in the translucent place, and the thin lines will also be cured due to the diffraction of light, making development difficult .